3M 다이아몬드 마이크로 피니싱 필름 롤 675L

강력한 폴리에스테르 필름 뒷면과 날카로운 다이아몬드 광물로 설계된 3M™ 다이아몬드 마이크로피니싱 필름 롤 675L은 열 스프레이 코팅, 세라믹, 탄화물, 냉각철, 화강암과 같은 경금속에 미세한 마감 처리를 제공합니다.

7+4란?

제품 설명

  • Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
  • Enables slow abrasive feed rates and fewer steps which reduces abrasive costs
  • Polyester film backing allows roll to be used dry or wet with surface lubricants
  • An exceptional roll for thermal spray finishing of contour / complex shapes
  • Color coded to reduce the risk of error and mixing up abrasive grades

High-quality Materials for Microfinishing
3M Diamond Microfinishing Film Roll 675L securely anchors micron-graded diamonds to a polyester film backing. Known for its strength and resilience, the polyester film backing makes it tough so that it can withstand heavy-duty finishing. The rolls are also color coded by grade to help you reduce the risk of selecting the wrong grade.

Waterproof Backing
Polyester film backings are also water resistant, so the abrasive may be run with a wet lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. When used in roll form for a process like superfinishing, our 3M 다이아몬드 마이크로 피니싱 필름 롤 675L enables slow abrasive feed rates and requires fewer steps, because of its durability, which in turn can reduce costs.

Achieving the Desired Roughness Average
Many microfinished products require a specific Ra, or roughness average. To obtain the desired Ra when applying thermal spray coatings, we recommend following a unique sequence of steps tailored to the substrate. It is important for operators to consider these factors — Ra and substrate — when selecting the grade of film for this belt.

Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a suitable abrasive for your finishing needs.

Sequential Surface Finishes Obtained (Ra Micro Inch)
Roll Material 74μ 45μ 30μ 20μ
Tungsten Carbide Ra 12-16 8-12 5-8 2.5-5
Chrome Carbide Ra 15-20 10-14 6-10 4-6
Nickel Based Ra 20-55 14-19 6-10 4-6
Chrome Oxide Ra -55 -45
 
Operating Conditions Recommended Acceptable Range
Workpiece Speed 300 sfpm 150-350
Traverse Rate 0.07 inch/rev 0.03-0.1
Abrasive Support 65 Shore A Roller
Abrasive Speed 0.5-1.0 inch/min
Pressure 20 lbs/inch width 10-40
Oscillation Alternating Moderate/None
Coolant Water with 4-8% synthetic coolant

제품 세부 정보 및 주요 사양

연마재
Diamond
애플리케이션
마무리
백킹 재료
폴리에스테르 필름
뒷면 두께(영국식)
5 mil
색상 제품군
베이지, 녹색, Multi-color
Core Size (Imperial)
3인치
Core Size (Metric)
76.2mm
장비 - 기계
Superfinishing Machines
홀 구성
Plain
산업 분야
항공우주, 일반 산업, Precision Grinding & Finishing, 운송 및 중장비
미크론 등급
20 μm, 30 μm, 45 μm, 74 μm
전체 길이(영국식)
50 ft
전체 길이(미터법)
15.24 m, 15.25 m
전체 너비(영국식)
4인치
전체 너비(미터법)
101.6mm
제품 색상
베이지, 회색, 녹색, Teal
크기(미터법)
101.6 mm x 15.24 m, 101.6 mm x 15.25 m
기판
Carbide, Cast Iron, Ceramic, Chilled Cast Iron, Chrome Carbide, Chrome Oxide, Granite, High Nickel Alloy, HVOF, Nickel Based, 비철금속, Oxide, Soft Metal, Stone, Tungsten Carbide

제품 애플리케이션

인증서

          

최신 뉴스