3M Diamond Microfinishing Film Roll For Sale-Xinhongrui

Descrizione dei prodotti

Micron-graded diamond mineral delivers close tolerance precision finishes for medium stock removal
Enables slow abrasive feed rates and fewer steps which reduces abrasive costs
Polyester film backing allows roll to be used dry or wet with surface lubricants
An exceptional roll for thermal spray finishing of contour / complex shapes
Color coded to reduce the risk of error and mixing up abrasive grades

High-quality Materials for Microfinishing
3M Diamond Microfinishing Film Roll 675L securely anchors micron-graded diamonds to a polyester film backing. Known for its strength and resilience, the polyester film backing makes it tough so that it can withstand heavy-duty finishing. The rolls are also color coded by grade to help you reduce the risk of selecting the wrong grade.

Waterproof Backing
Polyester film backings are also water resistant, so the abrasive may be run with a wet lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. When used in roll form for a process like superfinishing, our Rotolo di pellicola di microfinitura diamantata 3M 675L enables slow abrasive feed rates and requires fewer steps, because of its durability, which in turn can reduce costs.

Achieving the Desired Roughness Average
Many microfinished products require a specific Ra, or roughness average. To obtain the desired Ra when applying thermal spray coatings, we recommend following a unique sequence of steps tailored to the substrate. It is important for operators to consider these factors — Ra and substrate — when selecting the grade of film for this belt.

Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a suitable abrasive for your finishing needs.

Sequential Surface Finishes Obtained (Ra Micro Inch)
Roll Material		74μ	45μ	30μ	20μ
Tungsten Carbide	Ra	12-16	8-12	5-8	2.5-5
Chrome Carbide	Ra	15-20	10-14	6-10	4-6
Nickel Based	Ra	20-55	14-19	6-10	4-6
Chrome Oxide	Ra	-55	-45	—	—

Operating Conditions	Recommended	Acceptable Range
Workpiece Speed	300 sfpm	150-350
Traverse Rate	0.07 inch/rev	0.03-0.1
Abrasive Support	65 Shore A Roller	—
Abrasive Speed	0.5-1.0 inch/min	—
Pressure	20 lbs/inch width	10-40
Oscillation	Alternating Moderate/None
Coolant	Water with 4-8% synthetic coolant

Dettaglio prodotto e specifiche principali

Materiale abrasivo	Diamond
Applicazione	Finitura
Materiale di supporto	Pellicola di poliestere
Spessore del supporto (imperiale)	5 mil
Famiglia di colori	Beige, Green, Multi-color
Core Size (Imperial)	3 in
Core Size (Metric)	76.2 mm
Attrezzature - Macchine	Superfinishing Machines
Configurazione del foro	Plain
Industrie	Aerospaziale, Industria generale, Precision Grinding & Finishing, Trasporti e attrezzature pesanti
Grado Micron	20 μm, 30 μm, 45 μm, 74 μm
Lunghezza complessiva (imperiale)	50 ft
Lunghezza complessiva (metrica)	15.24 m, 15.25 m
Larghezza complessiva (imperiale)	4 in
Larghezza complessiva (metrica)	101.6 mm
Colore del prodotto	Beige, Gray, Green, Teal
Dimensioni (metriche)	101.6 mm x 15.24 m, 101.6 mm x 15.25 m
Substrato	Carbide, Cast Iron, Ceramic, Chilled Cast Iron, Chrome Carbide, Chrome Oxide, Granite, Lega ad alto tenore di nichel, HVOF, Nickel Based, Metallo non ferroso, Oxide, Metallo morbido, Stone, Tungsten Carbide